High-performance concentrated alkaline pre-wash, specifically formulated for treating heavily soiled vehicles or those intended for polishing and protection processes.
Thanks to its high degreasing and decontaminating capacity, it can rapidly dissolve stubborn dirt, road film, grease, organic residues and environmental contamination, preparing the surface for safer and more effective manual washing.

Its rapid action helps reduce the risk of swirls and micro-scratches, as it removes most impurities before contact washing.
It is particularly suitable for: pre-polishing, industrial or work vehicles, cars exposed to extreme environmental conditions

Key Features

• Concentrated alkaline formula with rapid action
• Removes grease, road film, organic residues and heavy contamination
• Reduces swirl risk during manual washing phase
• Ideal for preparing the surface for polishing or protection
• Can be used with foam cannon or pressure sprayers

Recommended Dilution

• Foam cannon: from 1:10 to 1:15, depending on contamination level
• Pressure sprayer: from 1:100 to 1:150 depending on contamination level

Do not use undiluted. Adjust dilution based on dirt present.

Directions for Use

1. Shake well before use.
2. Dilute the product in a foam cannon or pressure sprayer.
3. Apply evenly over the entire external surface of the vehicle, from bottom to top.
4. Leave to act for maximum 60 seconds.
   Do not let the product dry on the surface.
5. Rinse thoroughly with high-pressure water
6. Proceed with contact washing.

Warnings

• Do not use on hot surfaces or under direct sunlight.
• Do not leave for more than 60 seconds.
• Do not let the product dry.
• Avoid contact with unprotected delicate surfaces (e.g. raw aluminum).
• Store in a cool, dry place.
• Always test on a small area before full use.